Fabric Core Conveyor Belt Product Features

- Feb 10, 2018-

1, This product is made of cotton canvas (CC) or cotton interwoven dipped canvas (VC) by rolling, forming, curing and other processes. The company is located in:

2, the product to meet the requirements of different conditions of use, can be made of edging, open edge, ladder type, side ladder and other different structural specifications

(1) with core material: T / C woven cloth TC-70 type, cotton canvas CC-56 type

(2) bandwidth: 300mm-3000mm

(3) Cloth: 1-12 layers

(4) cover plastic thickness: Face: 1.5-10mm non-face: 0mm-6mm. The conveyor belt is made of fiber fabric with a plain rubber cover and a smooth surface (Figure 1. The core is a layered or monolithic fabric woven from fibers such as cotton, nylon, polyester or vinylon. Cotton Fiber is the earliest used core material, easy to bond with rubber, wet strength slightly increased, but the breaking strength is low [mostly at 56 N / (mm · layer)〕, corrosion and mildew is poor, the use of decreasing. Nylon fiber fabrics have been used as the core material since the late 1950s and have become the most widely used type. Nylon fiber strength is as high as 700 N / mm (milliliters), resistant to water, corrosion and bending fatigue; however, elastic elongation Larger.Compared with nylon fiber, polyester fiber is a promising material with elastic elongation of only half that of nylon fiber.Vinylon fiber has the strength of 200 N / mm, elastic elongation Longer than nylon fiber, easy to bond with rubber, good heat resistance, but the intensity of wet state to be reduced by 10 to 25%, only in China, Japan and a few other countries in the use of braided core can only use a fiber , Also available two kinds of fiber Dimensional blending or interweaving.

3, common conveyor belt is widely used in building materials, chemicals, coal, electricity, metallurgy and other departments, suitable for conveying non-corrosive non-corrosive bulk, granular, powder materials such as coal, coke, sand Stone, cement and other loose materials (materials) or parts, conveying bulk density of 6.5 ~ 2.5t / m3 all kinds of lumpy, granular, powder and other loose materials, can also be used for adult goods transport.